Concrete pool decks in Kingman AZ - poured and cured with the heat in mind
Cracked, sinking or rough concrete around your pool? We rebuild it on packed ground and pour at an hour we plan around the heat.
- Licensed and fully insured.
- Free on-site estimates.
- We respond within 1 business day.
What does it take to build a concrete pool deck in Kingman?
The short answer: A concrete pool deck is the slab around your pool, and building one in Kingman means preparing the ground underneath, then placing, compacting and finishing fresh concrete into a surface that sheds water away from the pool and the house and gives bare feet some grip.
Most calls about a pool deck start with an old one that has cracked, sunk or gone rough underfoot, or with a new pool that needs concrete around it. The price moves mostly with the size of the deck, how much old concrete has to come out first, which is where concrete cutting sometimes comes in, how much work the ground needs and the finish you choose. The schedule turns on the weather around pour day, whether your job needs a permit and the curing time before the deck is ready to use, and the estimate after my visit is where your own figure comes from.
How can you tell your pool deck needs replacing?
Cracks that keep spreading
A crack that opens wider each season, or new ones branching off it, usually means the ground underneath has moved or the joints weren't cut where the concrete wanted to crack. Left alone, water gets into the crack and under the slab, and the pieces start to shift and catch toes.
Water pooling or running toward the house
Puddles that sit after a swim, or splash-out that runs toward the house instead of away, usually mean the deck has settled or was never sloped properly. The longer water sits against the house or soaks under the slab, the more ground it softens and the more the deck sinks.
A rough, dusty or chipped surface
A top that wears to grit or flakes at the edges often comes from a pour in the heat of midday or a deck that dried out too fast while it cured. It gets harder on bare feet each year, and patches rarely hold for long on a weak surface.
How we build concrete pool decks
A pool deck needs a crew that's ready for the heat, so the first thing I settle with you is the pour time, chosen ahead so the concrete goes in when the weather is on our side. Our crew digs out to firm soil and packs the subgrade the deck will sit on, because a deck poured over raked dirt settles right along with it. We set the forms with a slight fall away from the pool and the house so water runs off, and we lay rebar so steel inside the slab helps hold it together. Then we place, compact and finish the concrete, cut control joints so the slab cracks along straight grooves we chose instead of wherever it likes, and brush a broom finish across the top so wet feet can grip. After that we protect the fresh deck while it cures and gains strength, because concrete that dries out too fast ends up with a weaker top. There's one trade-off I'll always name: if the budget gets tight, cut back on the finish rather than the ground work, because the finish is what you see on the first day but the ground decides whether the deck stays level for years.
Pool decks often come with other work close by. Where the deck meets a back door or a lower part of the yard, we can pour concrete steps in the same project so the heights line up, and if a pool house or covered room is part of your plans, it gets its own slab foundation, formed and poured to carry walls and a roof.
Broom-finished concrete
This suits most families, because the brushed texture gives wet feet some grip and the plain finish keeps the cost down. It's the hard-wearing deck most people picture around a backyard pool.
Stamped or patterned concrete
This suits a yard where the deck is the main view from the house, since stamped concrete can take on a stone or tile look. It adds time and cost to the finish, so I'd only choose it once the ground work is fully covered in the budget.
What happens after you call us about a pool deck in Kingman?
Here is how a pool deck goes with us, from your first call to the day we walk the finished deck together. Each step is settled before any concrete is ordered.
- Step 01
Call and set a visit
Thank you for calling. We set a time for me to come out, look at the pool and the yard, and hear what you have in mind for the deck.
- Step 02
Get your estimate after the visit
Once I've seen the site, you get your estimate. That's where the figure for your own deck comes from, so you aren't left guessing at the price.
- Step 03
Confirm the office and pour time
Before we pick a pour date, we look up which office covers your address. Then we agree on the day and the hour of the pour with you, because in hot weather the time of day matters.
- Step 04
Prep, pour and walk through
Our crew preps the ground, sets the forms, pours and finishes the deck. When it's done, we walk the finished job with you.
Permits and soil for concrete pool decks in Kingman
Whether your pool deck needs a permit isn't something I'll assume, because it depends on which office covers your address and what that office asks for. Inside the city, the City of Kingman takes applications and posts inspection results on its online permit portal, and in unincorporated parts of the county the Mohave County Building Division reviews plans and inspects the work. Before we set a pour date, we look up which office covers your address, and when the job needs a permit, we take care of the application.
Problem soils are found throughout Arizona, and expansive clay swells when it gets wet and shrinks as it dries, which can badly damage homes and sidewalks. A pool deck gets wet far more often than most slabs, so when I look at your yard I check the soil and where the water will run before deciding how much base the deck needs. We weigh the same ground and drainage questions on backyard jobs in Golden Valley and New Kingman-Butler, and we prepare the base the same careful way there.
Ask for an estimate on your pool deck
We reply within one business day and set a time for me to come out and look at your yard. The estimate is free, done on site and comes with no obligation.
Why Kingman homeowners call Kingman Concrete Company
The owner estimates and runs it
I come out to see the job and give the estimate myself, and I run the work on site while our own crew does the prep, forming, pouring and finishing. The person who planned your deck is the one standing there on pour day.
Trained on a city crew
I learned concrete on a municipal crew pouring curbs, walks and slabs, and I started this business in Kingman in 2020. Public work taught me to plan a pour carefully and check it the same way, which is exactly what a hot-weather deck needs.
Licensed and fully insured crew
We're licensed and fully insured for the work we do at your home. That matters beside a pool, where our crew is working close to your water, your equipment and your house.
If a pool deck is on your list, please contact us with your address and a rough idea of the size, and I'll arrange a time to come out.
Pool deck questions we hear in Kingman
How much does a concrete pool deck cost in Kingman, AZ?
Installing a concrete pool deck usually costs about $10 to $12 per square foot across the US, and that's a national figure for the work, not a Kingman price or ours. Your own figure comes from the estimate after I've seen the yard, since removal, ground work and finish vary from one job to the next.
What is the best way to pour a concrete pool deck in hot weather?
Industry guidance on hot-weather concrete says to place it at a time of day or night when the weather is favorable, so the pour hour should be planned with the crew well ahead. Wind and sun count as much as the thermometer, and the same guidance treats a windy, sunny day as needing stricter precautions than a calm, humid one at the same temperature.
What causes a new concrete pool deck to crack?
Heat is a common cause, because fresh concrete sets faster in hot weather and cracks more readily as it shrinks or warms up. Faster setting also makes it harder to handle and finish, so the crew's plan for the heat shapes the finished deck as much as the price does.
How do I choose a contractor for a concrete pool deck?
Ask about their past hot-weather pours, because industry guidance says the most serious problems come when a crew lacks experience with hot weather or with that type of work. The same guidance says last-minute fixes rarely succeed, so the heat plan should be settled before pour day. I'm glad to walk you through ours when I come out.
Does a contractor need a license for a small concrete job in Arizona?
Usually yes, because Arizona's licensing law exempts only casual or minor work under $1,000. That exemption ends when the work needs a local building permit or is part of a larger project, so a pool deck is rarely small enough to fall under it.
How far from the water does a pool fence have to be in Arizona?
Arizona's pool enclosure law puts the wall, fence or barrier at least 20 inches from the water's edge. A local barrier ordinance takes precedence over the state rule where one exists, and the state rule excludes homes where everyone living there is at least six years old. Because the fence often stands on or beside the deck, we talk through where it will go before we set the forms.
Related concrete work around your pool
Concrete steps construction
If your yard drops from the house to the pool, new concrete steps poured to meet the deck make that walk easier and steadier underfoot.
Slab foundation building
Planning a pool house, equipment shed or covered cabana beside the deck? It needs a slab foundation built and checked for a structure, not just foot traffic.
Call to plan your pool deck pour
We answer (928) 391-0060 every day from 7 AM to 10 PM, or you can send our estimate form whenever it suits you, so your pour can go on the calendar early.