Garage floor concrete in Kingman AZ - a slab built on well-packed ground
Cracked, sunken or puddled garage floor? We dig out, pack the ground and pour a new slab with the joints laid out first.
- Licensed and fully insured.
- Free on-site estimates.
- We respond within 1 business day.
What does a new garage floor in Kingman involve?
The short answer: Garage floor concrete in Kingman, AZ means breaking out the old slab or starting on bare ground, digging out and packing what the floor will sit on, and pouring a new slab with joints planned so it holds up under your cars.
Thank you for looking us up. Kingman Concrete Company is based in Kingman, and we pour garage floors here and across the cities around it. Most calls come from people whose old floor has cracked, sunk or started holding water, and from people building a new garage on their own land. The price moves with the size of the garage, how much old concrete has to come out, how much digging and fill the ground needs, and whether you want steel in the slab or a floor ready for a coating. The schedule turns mostly on the ground prep, the weather on pour day and curing, the slow hardening the slab needs before it can carry a car. If the budget is tight, I'd rather keep the base right and go simpler on the finish, because nobody sees the base on day one, but it decides how the floor holds up years later. Your estimate gives you the figure for your own garage.
How do you know your garage floor needs replacing?
Cracks that keep spreading
If a crack gets wider every year or its two sides no longer sit level, the ground under that part of the slab has usually moved. Left alone, the edges chip under your tires, and water and oil work down into the base and make it worse.
One corner sinking down
A corner or the edge by the door that has dropped usually means the base was raked level instead of dug out and packed, so it settled with the dirt. The drop tends to keep growing until it's a trip edge and a spot where the slab can break off.
Water standing by the door
Puddles that sit in the garage, or water that runs back toward the house wall, mean the floor was poured without a proper fall toward the door. That water soaks the base along the wall, which is how a small problem turns into a slab that has to come out.
How we pour garage floor concrete
On a replacement we start by breaking out the old slab and hauling it off, and on a new garage we start with the bare pad. Either way, we dig down to firm ground and pack the subgrade, the soil and gravel the slab sits on, in layers, because a base that's only raked level settles later and takes the floor with it. We check where water will run so the floor falls toward the door and away from the house, then set the forms and the rebar or mesh, the steel inside the slab that helps hold the pieces together if it cracks. I lay out the control joints before the pour. Those are straight cuts in the slab that give it a place to crack, so cracks land where we want them instead of across the middle of your floor. If you plan a coating later, I ask about it first, because it changes how we prepare the floor. After the pour we trowel the surface smooth or give it a broom finish, a light brushed texture that adds grip, cut the joints on time and let the slab cure.
A garage floor often ties into other work around it. If the walk or patio near the garage looks tired, decorative concrete can add color or texture there while the garage floor stays plain and easy to sweep. If the garage sits below a slope or beside ground cut into a hill, concrete retaining walls hold the soil back so it doesn't wash against the slab.
Replacing an old garage floor
This suits a floor that has sunk, broken up or holds water, where patching would only cover the problem. We break out the old slab so we can see and fix the ground under it before the new one goes in.
Pouring for a new garage
This suits people building on their own land, where the floor is part of a new building. We work from your plans and pour only after the ground is packed and checked, so the slab starts on a good base.
What happens when you call about a garage floor in Kingman?
Thank you for considering us. Here's how a garage floor goes with us, from your first call to the day we walk the finished slab together, and who you'll be dealing with at each step.
- Step 01
Call and set a visit
When you call, we set a time for me to come out, look at the garage and hear what you have in mind. It helps to have the garage size, the property address and any coating plans ready.
- Step 02
Get an estimate for your floor
I look at the old slab, the ground and where the water runs, and after that visit you get an estimate for your garage. You have a real figure to weigh before any date is set, so the cost isn't a guess.
- Step 03
We prep, form and pour
Before we pick a pour date, we look up which office covers your address. Then our crew preps the ground, sets the forms, pours and finishes the floor, and I run the work on site.
- Step 04
Walk the finished floor together
We walk the finished job with you and show you where the joints are and why they're there. I'll also tell you how long to keep the car off while the slab cures.
Garage floor concrete in Kingman: permits and ground
Who handles the permit depends on whether your house is inside Kingman city limits or out in unincorporated Mohave County. Inside the city, applications and inspection results go through the City of Kingman permit portal, where you can submit and check them. Outside the city, the county's Building Division reviews plans, and the county's list of work that needs no permit names driveways, not garage floors, and adds that all other rules still apply. So we don't treat a garage floor as exempt. We look up which office covers your address and take care of the permit application when the job needs one.
The ground is the other local factor. Problem soils turn up all over Arizona, and a common result is floor slabs that heave and crack, which is why we dig out and pack instead of raking level. We meet the same questions about the ground on garages in Golden Valley and New Kingman-Butler, and we prep it the same way there.
Get an estimate for your garage floor
We reply within one business day to set a time for me to come out, and the on-site estimate is free with no obligation. If you can, include your garage size, your address and any coating plans so I come prepared.
Why Kingman homeowners call Kingman Concrete Company
I give the estimate myself
I come out to see the garage and give the estimate, and I run the work on site while our own crew does the prep, forming, pouring and finishing. The person who planned your floor is the one standing there when it's poured.
Trained on a municipal crew
I learned concrete pouring curbs, walks and slabs for the city, and I started this business in Kingman in 2020. Public work taught me to plan a pour carefully and check it the same way, and that's how we run every garage floor.
Licensed and fully insured crew
We're licensed and fully insured. That way the work on your property is covered, and you aren't carrying the risk of an uninsured crew.
On a garage floor, the parts that matter most are the ones you can't see on the last day, like the ground underneath, the joints and the curing. When you're ready, call (928) 391-0060 or send us a message, and I'll set a time to come out.
Garage floor questions from Kingman homeowners
How much does a new garage floor cost in Kingman?
An installed standard concrete pour in Arizona usually costs about $5 to $11 per square foot, and that's a statewide range for the market, not our quote. Where your floor lands depends mostly on the size, the tear-out and the ground prep I mentioned at the top. I give you the figure for your own garage after I've seen it.
Will my new garage floor crack?
It may, because cracks in concrete can't be prevented entirely, and a well-built floor controls where they go instead. Properly designed joints are what control and keep down the cracking, which is why I plan them before we pour.
Does wire mesh keep a garage floor from cracking?
No, wire mesh won't stop a slab from cracking, but it tends to keep cracks and joints from opening up. So if you pay for mesh you get tighter cracks, and it's still worth asking how the joints are planned.
How do I know if I need a soil test before a garage floor pour?
If you suspect problem ground, the surest check is a reputable geotechnical firm that takes soil borings and tests how expansive the soil is, meaning how much it swells and shrinks. Set that test up before the pour so the results can shape how the floor is built. I'll tell you at the visit if anything I see makes me think it's worth doing.
What is the best way to pour a garage floor in Kingman heat?
Plan the pour around the weather, because high air temperature, low humidity and strong wind all affect fresh concrete from mixing to placing, and national concrete guidance says there are measures that reduce those effects. Ask any contractor which measures they'll use if pour day is hot, dry or windy. I'll go over ours at the estimate, and on our jobs that usually starts with an early-morning pour.
Can I pour my own garage floor in Arizona?
Yes, Arizona law lets you improve your own property yourself, with your own employees or with duly licensed contractors, as long as the work isn't for sale or rent. Keep that condition in mind if you're building to sell. If you'd rather hand over the heavy parts, we're glad to talk it through.
Related concrete services around your garage
Decorative concrete
Worth a look if the front walk or patio near the garage looks tired, since colored or patterned concrete can freshen it up without changing the garage floor.
Concrete retaining walls
Useful when your garage sits below a slope or beside a cut bank, because a wall holds the soil and runoff back from the slab.
Book a visit for your garage floor
Call (928) 391-0060 any day between 7 AM and 10 PM, or use our contact form if it's easier to write down your garage size and address.