Foundation installation in Kingman AZ - a base planned for your soil and plumbing
Building new on your land and not sure what the ground will do? We plan the soil, drains and pour before any concrete arrives.
- Licensed and fully insured.
- Free on-site estimates.
- We respond within 1 business day.
What does a new foundation in Kingman involve?
The short answer: Foundation installation in Kingman, AZ means building the concrete base your house, addition or shop rests on, usually a slab on grade or a crawlspace, with the ground, the drains and the pour planned before any concrete arrives.
Most people who call us about a foundation are building new on their own land or adding a shop, and the foundation is the first thing that goes in and the last thing anyone wants to redo. The price moves with the size and type of foundation, what the soil turns out to be, how much digging and base work the lot needs and how much engineering the design calls for, while the schedule mostly turns on getting the soils report, the plans and the permit in hand, then on the weather for pour day. My estimate after I've seen the site gives you the figure for your own job.
How do you know your lot needs extra foundation planning?
Cracks across dry ground
If the lot opens up in wide cracks when it's dry and turns to soft mud after a storm, the soil is usually moving with water. Pouring on it without testing first can leave a foundation that shifts with the seasons, and that's far harder to fix under a finished house.
Loose fill or a slope
A lot that's been built up with loose dirt, or one that slopes so a corner sits lower, usually needs digging out and packing before any forms go up. Fill that wasn't packed settles under a building's weight, and one low corner can show up later as sticking doors and cracked walls.
Water standing where you'll build
If rain sits in a low spot or runs across the place the building will go, the grade usually needs work first. A foundation set where water collects stays wet underneath, and that's the easiest problem to fix before the pour and the hardest one after.
What our foundation installation covers
Before anything else, I ask for any soils report and your building plans, because the foundation design should start from what the ground and the building need. Then we settle where every drain and the heating and cooling equipment go, since lines under a slab are set before the pour and moving them later means cutting concrete. On site our crew digs down to firm subgrade, the solid ground the foundation sits on, packs the base in layers instead of raking it level, sets the forms and ties in rebar, the steel inside that keeps cracks from opening up. We pour, finish and cut control joints, shallow grooves that give the concrete a planned place to crack, then keep it moist while it cures, the slow hardening that decides how strong it gets. If a budget gets tight, I'd rather trim the finish than the base, because nobody sees the base on day one, but it's what decides whether the foundation stays put.
Slab on grade
A slab poured straight onto the prepared ground suits single-story homes, shops and garages on fairly flat lots. It sits low and keeps the build simple, but the plumbing runs underneath, so the layout has to be final before we pour.
Crawlspace foundation
A raised floor over footings and short walls suits sloped lots where a slab would need a lot of fill, and owners who want the floor up off the ground. It takes more forming and more concrete in the walls, which usually shows up in the price.
What happens after you call us about a foundation in Kingman?
Here's how a foundation job runs with us, from the first call to the walk-through, so you know who you'll talk to and what's settled before the concrete shows up.
- Step 01
Call and set a site visit
Thank you for calling. We set a time for me to come out, look at the lot and hear what you plan to build, and it helps to have any soils report and building plans on hand.
- Step 02
Get your estimate and permit check
After the visit you get your estimate, so you know the figure before anything is scheduled. Before we pick a pour date, we look up whether the city or the county covers your address.
- Step 03
Prep, pour and walk through
Our crew preps the ground, sets the forms, pours and finishes. When it's done, we walk the finished job with you.
Foundation installation in Kingman and the county around it
If your lot sits outside Kingman city limits, in unincorporated Mohave County, the county's building division handles plan review and inspection for the work. When a building package comes without foundation plans, the county requires an engineer to design the foundation, and it accepts a soils report to back up a higher soil bearing pressure, the load the ground is rated to carry, in that design. Whichever office covers your address, we take care of the permit application when the job needs one.
Damage to buildings across Arizona is commonly tied to the soil, either clay that swells and shrinks with moisture or collapsing soil, which is loose, dry and light and shrinks when it gets wet or carries a heavy load like a house. The same soil question comes up on new builds in Golden Valley and New Kingman-Butler, so I look hard at the ground on every lot before anything gets formed. We're based in Kingman and work across the cities around it, and if your address isn't on our list, please ask us anyway.
Request an on-site foundation estimate
We reply within one business day to set a time for me to come out and look at your site. The estimate is free, done on site and comes with no obligation.
Why Kingman property owners call Kingman Concrete Company
I give every estimate myself
I come out to see the job and give the estimate myself, and I run the work on site with our own crew doing the prep, forming, pouring and finishing. The person who planned your foundation is the one standing there on pour day.
Learned on a municipal crew
I learned concrete pouring curbs, walks and slabs for the city, then started this business in Kingman in 2020. Public work taught me to plan a pour carefully and check it the same way, which is how we still handle every foundation.
Licensed and fully insured crew
We're licensed and fully insured, so you aren't carrying the risk of a crew working on your land. You're welcome to ask for proof of it before we start.
On a foundation, the parts you'll never see again once the walls go up are the ones I care most about getting right. Contact us or call (928) 391-0060 to set up a visit to your site.
Foundation installation questions from Kingman owners
How much does foundation installation cost in Kingman, AZ?
The cost depends mostly on the building's size, whether it's a slab or a crawlspace, and what the soil test shows, so I price each foundation after seeing the site. Poor soil, a sloped lot or a design an engineer has to work up adds digging, base material, forming and concrete, while a simple slab on a flat, firm lot keeps those down. You'll have your own figure after my visit.
Do I need a soil test before a new foundation in Kingman?
A soil test is the surest way to know whether the ground will swell or shrink, so plan and budget for one before the foundation is designed. The check that tells you most is a soil engineering firm that drills borings and tests how expansive the soil is. If you already have a soils report, send it to us early so the design starts from it.
What is the best way to choose between a slab and a crawlspace foundation?
Decide where you want your pipes and your heating and cooling equipment to sit, because that drives most of the choice. A crawlspace lets that equipment sit in a space under the floor that can be heated and cooled and lets the plumbing go in the usual way, while a slab puts the drains under the concrete. I'll go over both with you at the site visit, along with how your lot slopes.
How do I keep water away from a new foundation in Kingman?
Start with grading, so rain and ground water run away from the foundation before they ever reach it. Under a slab, a vapor retarder, a plastic sheet that blocks moisture, over a gravel layer that stops water wicking up keeps the concrete drier, with a drain tile where the soil calls for one. Once the building is up, gutters and downspouts sized to carry water away, plus longer eaves where you can fit them, help too.
How do you pour a foundation in Kingman's summer heat?
We plan pour day around the weather, because concrete industry guidance on hot weather says high heat, low humidity and wind all affect how concrete is mixed, hauled and placed. When we can, we start in the cooler early hours and keep the surface from drying too fast while it cures, since concrete that dries out on top in midday sun can end up weak and dusty. It's a fair question to ask any crew you're comparing.
Can I build my own foundation in Arizona without a contractor license?
Yes, if you're building on your own property to live in or use yourself, Arizona's contractor licensing law leaves you out, whether you do the work yourself or hire licensed contractors for parts of it. That only holds when the building isn't for sale or rent, and selling or renting it within one year after it's finished counts as evidence that it was. People building on their own land do call us for just the foundation.
Related concrete work for a new building
Concrete footings
If your plans call for a crawlspace, stem walls or a heavy load like a block wall, the footings carry that weight and need to be sized right.
Concrete parking lot building
A new shop or office usually needs room for customers and trucks to park, and planning the lot with the building keeps grading and drainage in one plan.
Set up a site visit for your foundation
We pick up (928) 391-0060 from 7 AM to 10 PM every day, so you can call after work or on a weekend, or send the form whenever it suits you.